Pudu Robotics
Terra Connect GmbH
https://www.terra-connect.de
mail@terra-connect.de
Zeiss Street 10
32584, Wages
Germany
Pricing Models
Compare options – clear, fast, no fine print. Our recommendation is highlighted.
Flexible financing
Inclusive
Lowest price
Inclusive
Flexible terms
Inclusive
Switch between the tabs to view content.
The PUDU GT7 combines precise spindle mowing technology with autonomous navigation and is specifically designed for high-quality professional sports turf.
With a 1,600 mm cutting width, precise path planning, and configurable driving patterns, the GT7 is suitable for the reproducible maintenance of soccer and training pitches.
Three independently mounted reel mower units follow the ground contours and ensure a uniform cut quality on high-quality and demanding turf areas.
The adjustable cutting height of 5 to 50 mm and precise mowing lines support the professional maintenance of high-quality stadium and event turf.
The GT7 can autonomously switch between different pitches or turf zones along pre-mapped internal routes and continue its work there.
All-wheel drive, a maximum slope gradient of up to 30°, and floating mower decks allow for use on sloped and uneven lawns.
The PUDU GT7 is an autonomous precision reel mower for professional sports fields, football pitches and training grounds, golf courses, and high-quality turf areas. Its 1,600 mm wide triple-reel cutting deck consists of three independently floating cutting units that follow ground contours to support uniform cut quality.
RTK, LiDAR, and camera-based perception enable precise navigation with an RTK accuracy of up to ±2.5 cm, as specified by PUDU. Cutting angles, directional changes, and lane offsets can be configured, allowing for reproducible professional mowing patterns. With a mowing capacity of up to 8,000 m²/h and an area coverage of up to 70,000 m² per full charge, the GT7 is designed for demanding professional turf maintenance.
Precision turf care for professional requirements:
The PUDU GT7 is aimed at operators who prioritize not only surface performance but especially the quality and reproducibility of the turf cut. Professional sports fields, training centers, and golf courses benefit from precise navigation, contour-following reel mowing units, freely configurable driving patterns, and autonomous multi-zone operation. Additionally, remote fleet management enables the monitoring of location, task progress, and system status from afar.
Terra Robotics
https://terra-robotics.de/
mail@terra-robotics.de
Zeißstraße 10,
32584 Löhne
Germany
PUDU GT7 – autonomous precision reel mower for professional sports and quality turf areas.
Dimensions: 1,950 × 1,600 × 1,400 mm
Weight: 900 kg incl. battery
Cutting width: 1,600 mm
Cutting height: 5–50 mm
Blades per cutting cylinder: 8 or 11
Mowing capacity: up to 8,000 m²/h
Max. mowing speed: 11 km/h
Max. mowing slope: 30°
Battery capacity: 26 kWh
Operating time: up to 12 hours
Area per charge: up to 70,000 m²
Charging time: 8 hrs standard / 4 hrs fast charging optional
PUDU GT7 performing autonomous precision mowing of a professional sports field with consistent cut quality.
Three independently floating reel mower units follow the ground contours and allow for a uniform cutting height of 5 to 50 mm. This makes the PUDU GT7 designed for the high demands of professional sports fields, golf courses, and high-quality lawn areas.
PUDU GT7 performing precise autonomous navigation and creating professional mowing patterns on a sports field.
RTK, LiDAR, and camera systems enable precise and stable navigation. Cutting angles, changes in direction, and lane offsets can be configured, allowing the GT7 to create automated lanes and reproducible professional stripe patterns.
The PUDU GT7 is an autonomous precision reel mower for professional sports fields, golf courses, and high-quality turf areas. It combines a triple-reel cutting system with RTK, LiDAR, and camera-based navigation.
The PUDU GT7 is specifically designed for professional sports fields, soccer and training pitches, golf courses, and other high-quality turf areas where precise and uniform cutting quality is required.
The PUDU GT7 combines RTK, LiDAR, and image processing. PUDU specifies an accuracy of up to ±2.5 cm for RTK positioning under suitable conditions.
The cutting height of the PUDU GT7 can be adjusted between 5 and 50 mm. The adjustment is made via a rotating mechanism and, according to the manufacturer, does not require any complicated tools.
Yes. Cutting angles, direction changes, and lane offsets can be configured. This allows for the creation of automated lanes and reproducible stripe patterns for professional sports surfaces.
According to the manufacturer, the PUDU GT7 can cover up to 70,000 m² or 7 hectares on a single battery charge in non-collection mode.
Yes. In addition to standard mowing operations, the GT7 supports an active collection mode. A twin-blower vacuum system collects grass clippings, leaves, and light debris in a collection container.
Yes. Multiple previously mapped playing fields or lawn areas can be connected via internal routes. The GT7 travels autonomously to the next zone and continues the mowing task there.
The PUDU GT7 features all-wheel drive and, according to the manufacturer, is designed for mowing on slopes of up to 30°. Its three floating mowing units also follow the contours of the ground.
Yes. Remote fleet management enables monitoring of live location, task progress, and system status. In addition, error notifications can be provided.
The PUDU GT7 is an autonomous precision reel mower for professional sports fields, golf courses, and high-quality turf areas. While classic robotic mowers are often geared towards the regular maintenance of simple green spaces, the GT7 was developed specifically for applications where particularly consistent cutting quality, precisely reproducible paths, and high area performance are crucial. Three independently mounted reel mowing units, precise RTK navigation, and all-wheel drive form the technical foundation for this.
With a cutting width of 1,600 mm and a mowing capacity of up to 8,000 m² per hour, the GT7 is designed for professional, large-scale turf maintenance. The cutting height can be adjusted between 5 and 50 mm. This makes the autonomous reel mower suitable for various requirements on sports and quality turf.
A key feature of the PUDU GT7 is the triple reel mower deck. The three cutting units are mounted in a floating manner independently of each other and can follow the contours of the ground. This is intended to achieve the most consistent cutting height possible, even on undulating sports turf.
Depending on the configuration, cutting cylinders with eight or eleven blades are used. The combination of reel technology and contour-following suspension is aimed specifically at operators who require high-quality and reproducible turf quality.
For soccer fields, training centers, stadiums, or other professional sports facilities, this can be a decisive difference compared to simple rotary mowing systems.
The GT7 is designed for a mowing capacity of up to 8,000 m² per hour. According to the manufacturer, the 26 kWh battery allows for an operating time of up to twelve hours. In non-collection mode, up to 70,000 m², or seven hectares, can be covered on a single battery charge.
This makes a single robot attractive even for larger sports facilities with multiple playing fields. Multiple turf areas can be connected via previously mapped internal routes. After completing a playing field, the GT7 can independently drive to the next zone and continue its work there.
This eliminates the need to manually move the robot after each completed area.
For high-quality sports field maintenance, it is not enough to simply drive autonomously over an area. Driving paths and overlaps must be as precise and reproducible as possible.
For this purpose, the PUDU GT7 combines RTK, LiDAR, and camera systems. Under suitable conditions, PUDU specifies an RTK positioning accuracy of up to ±2.5 cm.
This precise positioning also forms the basis for advanced path planning. Cutting angles, directional changes, and lane offsets can be configured. This allows for systematic paths and professional stripe patterns on sports fields to be created.
The characteristic stripe pattern of a professionally maintained soccer field is created through systematic and repeatable driving paths. With the GT7, various parameters of the mowing route can be adjusted.
This makes the robot suitable not only for pure area maintenance but also for locations where a reproducible appearance of the turf is required.
For operators of professional sports facilities, the automation of these recurring processes can help make workflows more standardized and predictable.
The PUDU GT7 supports two different operating modes. In standard mode, the area is mowed without using the vacuum system to collect the clippings. This allows the robot to operate particularly quietly.
Alternatively, an active collection mode is available. A dual-fan vacuum system picks up grass clippings, fallen leaves, and light debris and directs them into a collection container.
The GT7 also detects the fill level of the container and supports the resumption of the task after the necessary container emptying. However, PUDU does not describe an automatic self-emptying station for the GT7.
In addition to professional sports fields, PUDU expressly mentions golf courses as an important area of application for the GT7. Particularly there, consistent cutting heights, clean path tracking, and the quietest possible operation are relevant.
The purely electric chassis reduces noise emissions. If the fan motor is also deactivated in non-collection mode, PUDU describes operation as being particularly quiet. This can create additional time windows for turf maintenance.
Even undulating surfaces can be mowed by the independently movable mower units, provided the operational and local requirements are met.
The GT7 features a 4WD all-wheel drive and is specified for mowing tasks on inclines of up to 30°. This expands the scope of application beyond completely level playing fields.
This is relevant, for example, on golf courses, expansive training grounds, or sports facilities with varying terrain heights. At the same time, the three floating-mounted cutting units follow the respective ground contours.
For autonomous operation, the GT7 combines all-around RGB cameras, RGB-D sensors, ultrasonic sensors, and LiDAR. This allows the system to continuously perceive its surroundings.
According to the manufacturer, turf boundaries, pedestrians, and vehicles can be detected, among other things. Depending on the specific situation, the robot can stop, wait, or bypass an obstacle.
Especially on sports facilities, golf courses, or other publicly or commercially used areas, this environment perception is an important component of autonomous operation.
The GT7 also supports remote fleet management. Operators can monitor live location, task progress, and system status, among other things. Error notifications are intended to help identify necessary interventions at an early stage.
This makes the PUDU GT7 suitable not only as a single robotic mower for sports fields but also for larger facilities where multiple autonomous systems need to be monitored centrally.
Further information about the manufacturer can be found on our PUDU Robotics manufacturer page.
You can get an overview of other robotics manufacturers in our manufacturer overview.
Whether the PUDU GT7 is a good fit for your sports facility, golf course, or turf area depends on the area structure, desired cutting height, terrain, number of work zones, and operational requirements. Via our needs assessment, you can transmit the most important requirements directly to Terra Robotics.
